#TBT: Big Industry Problem—Miscalculating Gross Margin vs. Markup
Gross margin and markup on equipment are not the same thing. Many integrators are losing money on every project by not calculating it correctly.
For this Throwback Thursday, we bring you an important article from back in 2015 on the importance of calculating gross margin and markup correctly.
If you discovered that one of the basic tenets you use to run your business was incorrect, would you fix it? Of course you would.
So how many times at either the end of the month or the end of a project have you discovered that you did not make the profit you had anticipated? It probably happens a lot.
I am not talking about a job that had lots of mishaps or delays, but one that went smoothly; a job that you priced everything accordingly and your labor calculations were precise, but still your profit ended up lower.
This could be happening because you don’t know the difference between gross margin vs. markup. Indeed, most integrators do not know the difference between these two things, and the result is often a gross profit that runs well below their anticipated levels.
How Do You Calculate It?
Here is how it works. If you buy a product, let’s say a thermostat to keep it simple, for $100 and you want to make a 20 percent gross margin on it, at what price would you offer it to your customer? Most of you would mark the product up by 20 percent to $120. That is incorrect.
You see, 20 percent markup does not equate to a 20 percent gross margin. If you want to earn 20 percent gross margin on that product you would actually need to charge $125, or add a 25 percent markup.
Huh? What the heck is he talking about? How can 25 percent equal 20 percent?
In accounting mumbo jumbo, markup is the “percentage difference between the actual cost and the selling price,” while gross margin is the “percentage difference between the selling price and the profit.”
Mathematically, markup is always a larger number when compared to gross margin. So for non-financial individuals like me and many integrators, they believe they are earning a larger profit than is really the case.
So how is it calculated? In our example, that $100 thermostat that you charged $120 for has a 20 percent markup. ($120/$100 = 120 percent, or 20 percent markup over 100 percent). Easy math. But the gross margin is only 16.7 percent. ($20/$120 = 16.7 percent).
So how can you make an immediate impact on your bottom line? Start thinking in terms of how much gross margin you want to make on products vs. markup and price accordingly. It’s a small percentage difference, but can make a huge difference on your bottom line.
Here is a chart as a reference to help guide you:
- 15% Markup = 13.0% Gross Profit
- 20% Markup = 16.7% Gross Profit
- 25% Markup = 20.0% Gross Profit
- 30% Markup = 23.0% Gross Profit
- 33.3% Markup = 25.0% Gross Profit
- 40% Markup = 28.6% Gross Profit
- 43% Markup = 30.0% Gross Profit
- 50% Markup = 33.0% Gross Profit
- 75% Markup = 42.9% Gross Profit
- 100% Markup = 50.0% Gross Profit
I can’t take credit for recognizing this problem on my own. In fact, I would make the same mistake that most integrators make. The misunderstanding of these two accounting principles was brought to my attention by Jim Sweeney of Hometronics Lifestyles in Durham, Conn.
Sweeney has been in business for many decades, first in the alarm business and then in the custom installation business. He not only runs his company super-efficiently, but he shares his knowledge with others. He participated in the EHX Mentor Program for many years ago at the trade show doling out advice to newbie integrators. He is one of the smartest integrators I know.
According to Sweeney, the miscalculation between gross margin and markup frequent among integrators he has spoken with.
For the average integrator who earns about $800,000 per year in revenue with 60 percent of that revenue from equipment ($480,000), even just miscalculating by a few percentage points can be the difference between making it and folding up shop.
If you are still having trouble, simply Google “gross margin vs. markup” and peruse several of the accounting instructional items.
So, back to my original question: If one of the basic tenets for running your business is incorrect, would you fix it? Go back and look at every product you offer and simply change from using markup to gross margin in your calculations. It will make a big difference.
2019 State of the Industry Special Report - CE Pro Download
The custom electronics industry saw a healthy 8 percent growth rate in 2018, down slightly from the blazing 11 percent growth in 2017 but still admiringly strong. Our 2019 State of the Industry indicates that readers expect to see even more growth in 2019. Get your copy today.
Jason Knott is Chief Content Officer for Emerald Expositions Connected Brands. Jason has covered low-voltage electronics as an editor since 1990, serving as editor and publisher of Security Sales & Integration. He joined CE Pro in 2000 and serves as Editor-in-Chief of that brand. He served as chairman of the Security Industry Association’s Education Committee from 2000-2004 and sat on the board of that association from 1998-2002. He is also a former board member of the Alarm Industry Research and Educational Foundation. He has been a member of the CEDIA Business Working Group since 2010. Jason graduated from the University of Southern California. Have a suggestion or a topic you want to read more about? Email Jason at firstname.lastname@example.org
Follow Jason on social media:
BusinessHTSA Aims to Reduce ‘Techno-centric’ Sales Pitches via Training Program
Cat5, Cat6, and Cat6a: Is it Time to Start Future-Proofing?
JJ Opines: What if Local Integrators Collaborate, Not Just Compete?
Skywalker AV Revamps Website and Social Media Presence to Win Quest for Quality Award
Don’t Be Dissuaded by Companies Offering ‘No Contract’ DIY Security Products
View more on Business